Magnetic field sensors
Magnetic Field Sensors, Cables and Sensor Holder for MCE & MSCE
MSCE 25
Mini electric slider MSCE is a mini linear drive with an integrated linear guiding system and slide. By using an integrated precision ball screw drive, the rotary motion (rotation) of the drive shaft is converted to the linear motion (translation) of the slide with high mechanical efficiency and low internal friction.
A preassembled standard motor (in-line with a motor adapter and a coupling or in-parallel with a motor side drive and a timing belt) together with the standard drive, makes the system plug and play ready. Compact dimensions and optimally selected motor combinations cover a wide range of applications.
The aluminium base profile includes T-slots on the bottom for fixing the electric slider, as well as side slots for clamping fixtures and magnetic field sensors.
The aluminium slide and the front plate of the electric slider allow a wide range of options for mounting the working tools and attaching additional accessories. There are prepared connection holes on the slide and the front plate for an easy combination of the MSCEs to the multiaxis system, which makes this product highly flexible. There is also an option of the mini electric slider without the preassembled motor if an individual motor is required.
Positioning rod together with the rod seal ensures the protection of the ball screw drive from dust and other contamination.
Each MSCE is optimally pre-lubricated and ready for a maintenance-free operating process.
Note!
All the data of the dynamic load capacities (linear guiding system and ball screw drive) stated in the tables above are theoretical without considering any safety factor. The safety factor depends on the application and its requested safety and service life.
We recommend a minimum dynamic safety factor of 5,0 or more. Please refer to the Linear guiding and the Ball screw drive section, where the calculation of the safety factor of the ball screw drive and the linear guiding system and how the applied load affects the service life are presented.
Dimensions in mm.
Contact us for further information.
A preassembled standard motor (in-line with a motor adapter and a coupling or in-parallel with a motor side drive and a timing belt) together with the standard drive, makes the system plug and play ready. Compact dimensions and optimally selected motor combinations cover a wide range of applications.
The aluminium base profile includes T-slots on the bottom for fixing the electric slider, as well as side slots for clamping fixtures and magnetic field sensors.
The aluminium slide and the front plate of the electric slider allow a wide range of options for mounting the working tools and attaching additional accessories. There are prepared connection holes on the slide and the front plate for an easy combination of the MSCEs to the multiaxis system, which makes this product highly flexible. There is also an option of the mini electric slider without the preassembled motor if an individual motor is required.
Positioning rod together with the rod seal ensures the protection of the ball screw drive from dust and other contamination.
Each MSCE is optimally pre-lubricated and ready for a maintenance-free operating process.
Note!
All the data of the dynamic load capacities (linear guiding system and ball screw drive) stated in the tables above are theoretical without considering any safety factor. The safety factor depends on the application and its requested safety and service life.
We recommend a minimum dynamic safety factor of 5,0 or more. Please refer to the Linear guiding and the Ball screw drive section, where the calculation of the safety factor of the ball screw drive and the linear guiding system and how the applied load affects the service life are presented.
Dimensions in mm.
Contact us for further information.
Download PDF
code.product.loadingpdf
+
Tilføj til PDF-katalog
Product Information
Axial backlash: ≤ 0,05
Max. acceleration: 20 m/s
Protection class: IP40
Ambient temperature: 0 °C – +50 °C
Duty cycle: 100%
Maintenance: Life-time pre-lubricated
| Designation | Select all | Description | Ball screw (d x l) | Dynamic Load Capacity C | Max. Drive Torque Mₚ | Max. Travel Speed Vmax | Max. Rotational Speed nmax (min⁻¹) | No Load Torque M₀ | Axial dynamic load capacity Ca | Max. repeatability | Max. permissible axial load Fpa | Absolute stroke | Max. permissible payload horizontal mph | Max. permissible payload vertical mpv | Max. permissible radial load on shaft Fpr | Dynamic moments Mx | Dynamic moments My | Dynamic moments Mz | Max. permissible loads Forces Fpy | Max. permissible loads Forces Fpz | Max. permissible loads Moments Mpx | Max. permissible loads Moments Mpy | Max. permissible loads Moments Mpz | Motor type | Motor size (mm) | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Without motor | 6x2 mm | 1310 N | 0,06 Nm | 0,150 m/s | 4500 rev/min | 0,03 Nm | 1900 N | ±0,015 mm | 170 N | 25, 50, 75, 100, 125, 150, 175, 200 | 57 kg | 14 kg | 25 N | 4,8 Nm | 4,1 Nm | 4,1 Nm | 280 N | 580 N | 4,8 Nm | 4,1 Nm | 4,1 Nm | - | - |
|
||
|
|
Without motor | 6x6 mm | 1310 N | 0,10 Nm | 0,450 m/s | 4500 rev/min | 0,03 Nm | 1700 N | ±0,015 mm | 90 N | 25, 50, 75, 100, 125, 150, 175, 200 | 30 kg | 7 kg | 25 N | 4,8 Nm | 4,1 Nm | 4,1 Nm | 280 N | 580 N | 4,8 Nm | 4,1 Nm | 4,1 Nm | - | - |
|
||
|
|
With motor size 28 and motor adapter VK | 6x2 mm | 1310 N | - | 0,100 m/s | 3000 rev/min | - | 1900 N | ±0,015 mm | 170 N | 25, 50, 75, 100, 125, 150, 175, 200 | 57 kg | 14 kg | - | 4,8 Nm | 4,1 Nm | 4,1 Nm | 280 N | 580 N | 4,8 Nm | 4,1 Nm | 4,1 Nm | Stepper | 28 |
|
||
|
|
With motor size 28 and motor adapter VK | 6x6 mm | 1310 N | - | 0,300 m/s | 3000 rev/min | - | 1700 N | ±0,015 mm | 90 N | 25, 50, 75, 100, 125, 150, 175, 200 | 13 kg | 7,3 kg | - | 4,8 Nm | 4,1 Nm | 4,1 Nm | 280 N | 580 N | 4,8 Nm | 4,1 Nm | 4,1 Nm | Stepper | 28 |
|
||
|
|
With motor size 28 and motor side drive MSD | 6x2 mm | 1310 N | - | 0,094 m/s | 2810 rev/min | - | 1900 N | ±0,015 mm | 170 N | 25, 50, 75, 100, 125, 150, 175, 200 | 57 kg | 14 kg | - | 4,8 Nm | 4,1 Nm | 4,1 Nm | 280 N | 580 N | 4,8 Nm | 4,1 Nm | 4,1 Nm | Stepper | 28 |
|
||
|
|
With motor size 28 and motor side drive MSD | 6x6 mm | 1310 N | - | 0,281 m/s | 2810 rev/min | - | 1700 N | ±0,015 mm | 80 N | 25, 50, 75, 100, 125, 150, 175, 200 | 13 kg | 6,5 kg | - | 4,8 Nm | 4,1 Nm | 4,1 Nm | 280 N | 580 N | 4,8 Nm | 4,1 Nm | 4,1 Nm | Stepper | 28 |
|
| Designation | Select all | L1 | L2 | L3 | L4 | L5 | L6 | L7 | L8 | V1 | V2 | V3 | V4 | L9 | L10 | L11 | L12 | L13 | L14 | L15 | L16 | L17 | L18 | L19 | L20 | L21 | L22 | L23 | U1 | U2 | U3 | U4 | U5 | S1 | S2 | S3 | S4 | S5 | S6 | S7 | S8 | S9 | S10 | S11 | S12 | S13 | S14 | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
50 | 12 | 6 | 6 | Ø 12 | 36,50 | 58 | 25 | - | - | - | - | 13,50 | 19,25 | 4,40 | 19 | 17 | 18 | Ø M2,5 | 8 | 14 | 7 | Ø 5 (h7) | Ø 17,6 | Ø 20 (h7) | 4,50 | 2,30 | 2,20 | 4,20 | 2,80 | 1,40 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
||
|
|
50 | 12 | 6 | 6 | Ø 12 | 36,50 | 58 | 25 | - | - | - | - | 13,50 | 19,25 | 4,40 | 19 | 17 | 18 | Ø M2,5 | 8 | 14 | 7 | Ø 5 (h7) | Ø 17,6 | Ø 20 (h7) | 4,50 | 2,30 | 2,20 | 4,20 | 2,80 | 1,40 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
||
|
|
50 | 12 | 6 | 6 | Ø 12 | 36,50 | 58 | 25 | 35 | 24,50 | 28 | 5,50 | 13,50 | 19,25 | 4,40 | 19 | 17 | 18 | Ø M2,5 | 8 | 14 | 7 | Ø 5 (h7) | Ø 17,6 | Ø 20 (h7) | 4,50 | 2,30 | 2,20 | 4,20 | 2,80 | 1,40 | 1 | 22 | 12,50 | 52,5 (± 0,5) | 18,25 | 19,50 | 5,50 | 18 | Ø M4 | 6 | 24,50 | 31,50 | 34 | 38,50 | 83,25 |
|
||
|
|
50 | 12 | 6 | 6 | Ø 12 | 36,50 | 58 | 25 | 35 | 24,50 | 28 | 5,50 | 13,50 | 19,25 | 4,40 | 19 | 17 | 18 | Ø M2,5 | 8 | 14 | 7 | Ø 5 (h7) | Ø 17,6 | Ø 20 (h7) | 4,50 | 2,30 | 2,20 | 4,20 | 2,80 | 1,40 | 1 | 22 | 12,50 | 52,5 (± 0,5) | 18,25 | 19,50 | 5,50 | 18 | Ø M4 | 6 | 24,50 | 31,50 | 34 | 38,50 | 83,25 |
|
||
|
|
50 | 12 | 6 | 6 | Ø 12 | 36,50 | 58 | 25 | 35 | 24,50 | 28 | 5,50 | 13,50 | 19,25 | 4,40 | 19 | 17 | 18 | Ø M2,5 | 8 | 14 | 7 | Ø 5 (h7) | Ø 17,6 | Ø 20 (h7) | 4,50 | 2,30 | 2,20 | 4,20 | 2,80 | 1,40 | 1 | 22 | 12,50 | 52,5 (± 0,5) | 18,25 | 19,50 | 5,50 | 18 | Ø M4 | 6 | 24,50 | 31,50 | 34 | 38,50 | 83,25 |
|
||
|
|
50 | 12 | 6 | 6 | Ø 12 | 36,50 | 58 | 25 | 35 | 24,50 | 28 | 5,50 | 13,50 | 19,25 | 4,40 | 19 | 17 | 18 | Ø M2,5 | 8 | 14 | 7 | Ø 5 (h7) | Ø 17,6 | Ø 20 (h7) | 4,50 | 2,30 | 2,20 | 4,20 | 2,80 | 1,40 | 1 | 22 | 12,50 | 52,5 (± 0,5) | 18,25 | 19,50 | 5,50 | 18 | Ø M4 | 6 | 24,50 | 31,50 | 34 | 38,50 | 83,25 |
|
| Designation | Select all | Moved mass | Mass of the mini electric slider mMSCE | Mass moment of inertia JMSCE | ||
|---|---|---|---|---|---|---|
|
|
0,10 + 0,0010 x Abs. stroke (kg) | 0,20 + 0,0019 x Abs. stroke (kg) | "0,29 + 0,0007 x Abs. stroke + 0,1013 x mload (10⁻² kg cm²)" |
|
||
|
|
0,10 + 0,0010 x Abs. stroke (kg) | 0,20 + 0,0019 x Abs. stroke (kg) | "0,36 + 0,0016 x Abs. stroke + 0,9119 x mload (10⁻² kg cm²)" |
|
||
|
|
- | - | - |
|
||
|
|
- | - | - |
|
||
|
|
- | - | - |
|
||
|
|
- | - | - |
|
-
-
Motor adapter VK
For MCE & MSCE Mini Electric Cylinder & Slider -
Motor side drive MSD with a timing belt
For MCE & MSCE Mini Electric Cylinder & Slider -
Clamping fixture
Mounting Attachment Accessory Clamping fixture, powder coated zinc alloy -
Slot nut
Galvanized steel -
Centering ring
Stainless steel
